No issue causes more installation failures than moisture.  Few if any issues provide a greater opportunity to deliver lasting value and performance for flooring customers.  Schönox equips flooring professionals with solutions to do just that, mitigating moisture issues up to and including 100% RH (or 25 lbs./ 1000 sq. ft./24 hours).  Concrete slabs with troublesome moisture issues are readied for priming, leveling, and floor covering as well as long term performance.

Schönox moisture mitigation systems provide solutions beyond moisture concerns.  Substrates such as wood, dry gypsum, and those with non-water-soluble adhesives present weak, flaking, open surfaces.  Schönox EPA, and EPA Rapid successfully solidify those substrates, building a closed film ready for priming and leveling.  In addition, Schönox EPA and EPA Rapid provide a migration barrier over abated slabs, solving this serious industry issue.

Schönox moisture mitigation systems do the work of multiple subfloor products, providing solutions to moisture, substrate solidification, prior slab abatement, and other challenges.

Schönox EPA provides moisture mitigation up to 100% RH with one coat, solidifies weak substrates, and can be covered with a variety of floor coverings using certain Schönox adhesives, featuring a ready-for-leveling time of 4-6 hours, low odor, and high penetration in a two-part solution applied with a squeegee.

Schönox EPA Rapid includes all the benefits of Schönox EPA, but with half the wait time, ready for leveling in just 2-3 hours.